Floorhands & Derrickhands $34.00-$46.00/hour + $1000 Sign On Bonus

Rig Manager/Tool Push

DUTIES:

• Operate company equipment/vehicles
• Ensure company equipment is cleaned and kept orderly
• Ensure everyone is performing proper duties at all times
• Ensure rig setup is performed correctly
• Drive equipment onto lease and watch for signals
• Give signals to other drivers arriving on lease
• Ensure jobs are done safely and per procedures
• Communicate effectively with workers and oil company representative
• Drive truck during rig move
• Overlook all duties and paperwork necessary to perform each task
• Communicate with Contractors, Consultants, and any other service companies
• Order appropriate supplies

HEALTH AND SAFETY RESPONSIBILITIES:

• Ensure personal and crew safety training is kept up to date
• Know and Follow all appropriate rules and regulations
• Ensure all equipment is inspected prior to use
• Fill out hazard assessment prior to each job
• Communicate hazards with the crew
• Conduct pre-job safety meetings
• Fill out all applicable safety permits at each job site (daily or change of scope)
• Ensure all appropriate people have signed all permits
• Ensure everyone has appropriate PPE and it is in good condition
• Be familiar with all safe work procedures and JSA’s
• Ensure the crew is familiar with appropriate safe work procedures and JSA’s
• Ensure everyone is performing their duties safely
• Encourage the refusal of any work that is unsafe
• Investigate any refusals of work
• Report all accidents/incidents/near misses to Management
• Supervisor training
• Coordinate all safety drills (man down/fire/etc)
• Give jobs to crew for emergency response
• Perform Rig Inspections
• Ensure all people in lease sign in and out and are accounted for

QUALIFICATIONS:

• Hold all relevant safety tickets
• Previous Roughneck, Derrick, and Driller experience on Service rig
• At least 5-7 years experience on a Service Rig
• Hold a 1A drivers license
• Physically fit to perform laborious duties
• Supervisor Training

_ _ _ _ _ _ 

Driller

DUTIES

• Operate company equipment/vehicles
• Ensure company equipment is cleaned and kept orderly
• Ensure everyone is performing proper duties during rig setup
• Run controls to level the rig during setup
• Assist with any duties being performed (eg. railings, steps, floor, etc)
• Drive equipment onto lease and watch for signals
• Ensure jobs are done safely and per procedures
• Operating Controls
• Ensure all duties are being done properly
• Communicate with workers and rig manager
• During rig move drive the rig
• Overlook all duties on rig floor to ensure they are being performed correctly and safely

HEALTH AND SAFETY RESPONSIBILITIES

• Ensure safety training is kept up to date
• Follow all appropriate rules and regulations
• Inspect equipment prior to use
• Assist with hazard assessment prior to each job
• Participate pre-job safety meetings
• Sign and be familiar with all applicable safety permits at each job site (daily orchange of scope)
• Ensure you have appropriate PPE and it is in good condition
• Be familiar with all safe work procedures and JSA’s
• Ensure everyone is performing their duties safely
• Refuse any work that you feel is unsafe
• Report all accidents/incidents/near misses to Rig ManagerSupervisor training

QUALIFICATIONS

• Hold all relevant safety tickets
• Previous Roughneck and Derrick experience on Service rig
• At least 5 years experience on a Service Rig
• Hold a 1A drivers license
• Physically fit to perform laborious duties
• Supervisor Training

_ _ _ _ _ _ 

Derrickhand

DUTIES

• Operate company equipment/vehicles
• Assist with cleaning company equipment and keep things orderly
• Assist with rig set up (railings/steps/rig floor etc)
• Put stands under the front and belly jacks
• Ensure load lines and guide lines don’t get caught on the rig during setup
• Drive equipment onto lease and watch for signals
• Ensure jobs are done safely and per procedures
• Running tongs
• Pulling pipe
• Throwing pipe
• Climb ladder to Derrick
• Use rod transfer when running and pulling rods
• Ensure load lines and guide lines don’t get caught when rigging out
• Assist with taking down railing and steps on rig
• During rig move drive the pump and tank or other equipment
• In charge of pump operation in winter (diesel to ensure it does not freeze)

HEALTH AND SAFETY RESPONSIBILITIES

• Ensure safety training is kept up to date
• Trained in Fall Protection and follow all rules and regulations
• Inspect Fall Protection equipment prior to each use
• Assist with hazard assessment prior to each job
• Participate pre-job safety meetings
• Sign and be familiar with all applicable safety permits at each job site (daily or change of scope)
• Ensure you have appropriate PPE and it is in good condition
• Be familiar with all safe work procedures and JSA’s
• Speak up if you see someone performing an unsafe act or duty
• Refuse any work that you feel is unsafe
• Report all accidents/incidents/near misses to Rig Manager

QUALIFICATIONS

• Hold all relevant safety tickets-CPR/First Aid, H2S Alive, Rig Rescue, TDG, WHMIS, Confined Space
• Previous Roughneck experience on service rig
• Hold at least a class 5 drivers license
• Hold a 1A drivers license
• Physically fit to perform laborious duties
• Fall Protection training

_ _ _ _ _ _ 

Roughneck/Floorhand

DUTIES

• Assist in operation of company equipment/vehicles
• Cleaning company equipment and keep things orderly
• Assist with rig set up (railings/steps/rig floor etc)
• Run line from pump and tank to wellhead during rig setup
• Assist with guiding equipment onto lease (signals)
• Ensure jobs are done safely and per procedures
• Picking pipe
• Laying down pipe
• Run tongs on rig floor
• Spin rods with wrenches
• Put matting away after rig is lowered
• Take down line from pump and tank to wellhead while rigging out
• Make sure lines from tubing board don’t get tangled with the wellhead while rigging out
• Assist with taking down railing and steps on rig
• During rig move drive drillers truck or 5 ton if proper license is held

HEALTH AND SAFETY RESPONSIBILITIES

• Ensure safety training is kept up to date
• Assist with hazard assessment prior to each job
• Participate pre-job safety meetings
• Sign and be familiar with all applicable safety permits at each job site (daily or change of scope)
• Ensure you have appropriate PPE and it is in good condition
• Be familiar with all safe work procedures and JSA’s
• Speak up if you see someone performing an unsafe act or duty
• Refuse any work that you feel is unsafe
• Report all accidents/incidents/near misses to Rig Manager

QUALIFICATIONS

• Hold all relevant safety tickets
• Previous oilfield experience is an asset
• Encouraged to have a 1A drivers license
• Physically fit to perform laborious duties